Kyle Nowack
BLS Instructor Trainer & AED Program Specialist
Active AHA BLS Instructor and Red Cross BLS Instructor Trainer. Owner of Total AEDs and co-founder of AED Log. 15+ years in lifesaving and AED training. Read Kyle's full bio
Products ship in original manufacturer packaging with full OEM warranty.
Genuine non-rechargeable lithium battery for the ZOLL AED 3. This battery ensures your ZOLL AED 3 is always powered and ready for use in emergencies. Designed specifically for the ZOLL AED 3, this reliable, long-lasting battery is easy to install and provides consistent performance when you need it most, with up to 5 years of standby life once installed.
The 8000-000696 is a "smart" battery: it reports its own power level status directly on the ZOLL AED 3's LCD screen, and on WiFi-enabled units, it can transmit that status automatically to your AED program management system. Keep in mind that enabling WiFi status reporting can modestly reduce the battery's standby life compared to the baseline 5-year rating.
The ZOLL AED 3 Non-Rechargeable Lithium Battery (SKU 8000-000696) is a replacement lithium manganese dioxide battery designed specifically for the ZOLL AED 3. It is non-rechargeable, rated for up to 5 years of standby life once installed, and built to provide consistent, reliable performance in an emergency, exactly when your AED needs it most.
Rather than requiring a manual check to know the battery's condition, this battery's smart technology reports its power level status directly on the ZOLL AED 3's touchscreen display. On WiFi-enabled AED 3 units, that status can also transmit automatically to an AED program management solution, giving administrators visibility into battery readiness across multiple devices without a site visit.
This 8000-000696 battery is compatible with both the ZOLL AED 3 and ZOLL AED 3 BLS configurations.
The ZOLL AED Plus and ZOLL AED Pro use different battery formats, not this AED 3 battery. Confirm your AED model before ordering.
Pair this battery with the correct ZOLL AED 3 electrode pads so both consumables land on the same maintenance schedule.
Each ZOLL AED 3 battery from Total AEDs ships ready for direct installation into your AED 3:
This battery does not include a ZOLL AED 3 unit (it is a consumable replacement for existing AED owners) or ZOLL AED 3 electrode pads (sold separately). Batteries and pads replace on different schedules, so check both when planning your AED's next maintenance cycle. Call Total AEDs at (855) 286-6384 to build a complete replacement bundle.
One thing that sets the ZOLL AED 3's battery apart from older AED battery designs is how you find out its condition. Here's the difference between the AED 3's smart battery and a battery that requires a manual check:
Why this matters: for multi-site AED programs, WiFi-enabled status reporting means administrators can catch a low or failing battery remotely, rather than relying on a technician physically visiting the unit for a routine check.
Tradeoff to know: keeping WiFi status reporting enabled can modestly reduce standby life compared to the baseline 5-year rating, so weigh that against the convenience for your specific AED program.
The ZOLL AED 3 is designed to make battery status easy to check, and replacement is a straightforward, tool-free process:
Once installed, this battery is rated for up to 5 years of standby life. Keeping WiFi-based status reporting enabled can modestly reduce that figure, so check your specific unit's settings if maximizing standby life is a priority.
No. The 8000-000696 is a non-rechargeable lithium battery, designed as a single-use replacement once it reaches its standby life or shows a low-battery status, not a cell you recharge and reuse.
The genuine ZOLL AED 3 battery is part number 8000-000696.
The ZOLL AED 3's LCD screen displays the battery's current power level status directly. On WiFi-enabled units, that status also transmits automatically to your AED program management system, so you can check it remotely as well.
No. The ZOLL AED 3 is designed to use the genuine non-rechargeable 8000-000696 battery. A rechargeable battery is not the manufacturer-specified power source for this device.
The most reliable way to know is to check the manufacturer's label on the battery itself for its printed expiration date. Rely on that printed date rather than a general estimate, since it reflects your specific battery's manufacture date.
Power off the AED 3, locate the battery compartment as described in your operator manual, remove the expired battery, and insert the new 8000-000696 battery until it's fully seated. Power the unit back on and confirm the LCD screen shows a normal, ready status before returning it to service.
The ZOLL AED 3's smart battery and WiFi reporting are built to simplify readiness tracking, but they still require someone monitoring the status data and tracking installation dates.
OSHA does not set AED-specific maintenance rules, but a documented monthly visual inspection is standard practice and expected under the General Duty Clause. Track the 8000-000696's installation date alongside your pad replacement schedule, even with WiFi monitoring enabled.
AEDs used in youth sports and school settings can see irregular use but still require the same standby monitoring. A battery that's quietly passed its standby life is a preventable readiness gap.
The AED 3's WiFi status reporting is especially useful for organizations managing units across several locations, since administrators can review battery status remotely rather than relying on each site to notice a change. See Total AEDs Program Management for managed-service tracking of battery and pad expiration across your entire fleet.
Facilities registered under a state PAD program should keep battery and pad expiration current as part of ongoing compliance, not just at initial purchase.