AED Signs
Make every defibrillator in your facility findable in seconds with high-visibility AED signs from Total AEDs. We carry the full line of AED wall signs, 3D flag projecting signs, directional arrow signs, ceiling hangers, window decals, facility stickers, and AED inspection tags, all built around the universally recognized ILCOR/ISO 7010 E010 green-and-white AED symbol. Whether you need a single AED location sign for a small office or directional signage for a multi-floor school, hospital, or stadium, our signage helps your AED program meet OSHA, ANSI Z535, NFPA 101, Joint Commission, and state-level visibility requirements. Free standard shipping is available on orders $149+ within the contiguous U.S.
Browse AED signs below or call to speak with an AED program specialist.
(855) 286-6384
Location signs, 3D flag signs, directional arrows, decals, and inspection tags for every facility type.
Why AED signs save lives
An AED that bystanders cannot find inside three minutes is functionally an AED that does not exist for that rescue. AED signs solve the visibility problem in three ways.
A wall-mounted location sign or window decal directly above the cabinet identifies the AED at a glance from anywhere in the room.
Flag-style projecting signs and arrow signs at intersections, stairwells, and entrances guide rescuers from anywhere in the building.
Most state PAD laws, building codes, and accreditation bodies require AED locations to be clearly marked as part of a complete emergency response plan.
The cost of signage is trivial compared to the cost of an AED that goes unused because nobody could locate it during a 3-minute window.
AED sign types we stock
Different facilities need different signage. Use the breakdown below to match the right sign type to your space, then browse the product grid for compatible SKUs.
AED wall signs (flat-mount location signs)
Flat signs that mount directly above or beside an AED cabinet. Most common type. Available in rigid plastic, flexible vinyl, and aluminum, typically 7x10 in. up to 14x20 in. Best for direct identification when the responder is already in the same room or corridor.
3D flag and projecting AED signs
Three-dimensional signs projecting perpendicular from the wall, visible from 50 feet or more down a corridor. The single highest-impact sign type for hallway placement. Shipped flat and folded into a triangle or right-angle profile at installation.
AED directional and arrow signs
Wayfinding signs with the AED symbol plus a directional arrow (left, right, up, or down) for intersections, stairwells, elevators, and building entrances. Critical in large facilities where the AED is not visible from every common area.
Ceiling-mounted AED signs
Drop-down or hanging signs suspended from the ceiling, often double-sided so they are readable from both directions. Used in warehouses, gymnasiums, manufacturing floors, transit stations, and large open spaces where wall-mounted signs are too low to be seen.
AED window decals and stickers
Adhesive-backed decals for cabinet glass, building entry doors, or interior windows. The "AED on Premises" facility sticker is the standard exterior marker telling first responders, EMS, and visitors that an AED is available inside.
AED inspection tags
Small durable tags for documenting routine readiness checks (battery status, pad expiration, indicator light). Modeled on fire-extinguisher inspection tags. Required by many AED management programs and AHA program-management best practices.
Photoluminescent (glow-in-the-dark) AED signs
Treated with photoluminescent pigment that glows for hours after lights go out. Strongly recommended where power outages are possible: schools, healthcare, theaters, parking structures. Trending toward hard requirement in many state and municipal codes.
ADA-compliant and tactile Braille AED signs
Include raised tactile lettering and Grade 2 Braille for ADA accessibility. Typically required for AEDs in federal buildings, schools, and public-accommodation venues.
Are AED signs required by law?
Requirements vary by state and facility type. The general rule: most jurisdictions that mandate AEDs also mandate that those AEDs be clearly marked. Several authorities define signage as either required or strongly recommended.
State PAD laws
California, New York, Illinois, and New Jersey explicitly require AED signage in facilities where AEDs are mandated, especially schools, gyms, health clubs, and large public facilities.
ILCOR / ISO 7010 E010
ILCOR defines the universal AED symbol, the green ISO 7010 E010 pictogram with a white heart and lightning bolt, used worldwide for AED identification. The recognized global standard.
OSHA / ANSI Z535
OSHA does not directly mandate AEDs but expects signage compliance under 29 CFR 1910.145. ANSI Z535.2 defines color, layout, and pictogram standards treated as the U.S. industry default and frequently referenced in OSHA enforcement actions.
NFPA 101 Life Safety Code
Lists AED signs alongside fire-extinguisher and evacuation signage as best-practice emergency identification in the international fire code and international building code.
Joint Commission
Requires accredited healthcare facilities to maintain clear identification of emergency equipment locations, including AEDs, at every deployment point.
American Heart Association
Recommends standardized signage at all AED locations as part of a complete public access defibrillation (PAD) program. Treated as a duty-to-warn obligation in liability cases.
Where should an AED sign be placed?
Sign placement is as important as the sign itself. Follow the AHA and OSHA-aligned placement standards below to make every AED findable inside three minutes.
Directly above the AED
Mount the primary location sign with its center 60 to 72 inches above the floor, at adult eye level, ADA accessible, and visible from across the room.
Corridor intersections
Install 3D flag or projecting signs perpendicular to the wall with the bottom 84 to 96 inches above the floor, above head height, visible from 50 feet or more.
Building entry points
Place AED arrow signs at building entrances, lobby walls, elevators, stairwells, and major hallway intersections to direct any arriving responder.
The cabinet itself
Apply a window decal to the AED cabinet glass and add an "AED on Premises" exterior sticker at the building's main entry door so EMS knows before entering.
Match spacing to facility size
In large facilities (schools, hospitals, stadiums, airports) install directional signs every 100 to 200 feet so a responder is never out of sight of the next wayfinding cue.
Use the ILCOR/ISO 7010 symbol
Avoid custom designs. The standardized green AED pictogram is recognized globally and prevents confusion in mixed-language or international visitor environments.
How to choose the right AED signs
Three decisions narrow your selection from dozens of SKUs to the few you actually need.
1Identify the sign's job
Location signs
Identify the device. Mounted directly at the AED. Most facilities need at least one flat wall sign above every cabinet.
Directional signs
Guide responders to the AED from anywhere in the building. Arrow signs and 3D flags go at intersections, elevators, and entrances.
Documentation tags
Cabinet decals and inspection tags document readiness and identify the unit. Required by most AED management programs.
2Match the sign to the viewing distance
Same room (flat wall sign)
A 7x10 inch flat wall sign is enough for close-range identification in small offices, retail counters, and single-room deployments.
Corridor (3D flag sign)
A 3D flag projecting sign rated for 50-foot visibility is the right choice for hallway and corridor placement in offices, schools, and hospitals.
Large open space (ceiling hanger)
Double-sided ceiling-hanger signs perform best in warehouses, gymnasiums, and manufacturing floors where wall-mounted signs are blocked by crowds or shelving.
3Choose the material for the environment
Rigid plastic or aluminum (indoor)
Durable, fade-resistant, and the standard choice for most indoor deployments. Rigid plastic is the most common, aluminum for premium environments.
Photoluminescent (power-loss)
Glows for hours after lights go out. Recommended for schools, healthcare, theaters, parking structures, and any facility where power outages are possible.
UV-stable outdoor (exterior)
UV-stable inks and weather-sealed substrates required for parking lots, athletic fields, marinas, and exterior cabinet placements. Indoor signs installed outside will fade and peel within months.
AED signs for schools, offices, gyms, and public venues
Different environments call for different signage configurations. Common buyer setups for each facility type.
Schools and universities
- Location sign above each AED cabinet
- Directional signs at every hallway intersection
- ADA-compliant signs near classrooms
- Photoluminescent signs in stairwells
- "AED on Premises" decal at every main entrance
Offices and corporate facilities
- 3D flag projecting sign at the AED location
- Directional signs in lobby and elevator banks
- OSHA-compliant facility signage at main entrance
- Inspection tags for monthly readiness checks
Gyms, fitness studios, health clubs
- High-visibility 3D wall signs (required by law in many states)
- Directional signage from locker rooms and pool areas
- Waterproof decals near the cabinet
Churches and places of worship
- Location sign above the cabinet
- Directional signage from sanctuary and fellowship hall
- Photoluminescent signs for evening services
Hotels, restaurants, and retail
- Front-window "AED on Premises" decal for EMS
- Location sign above the cabinet
- Directional signs at reception and elevators
Hospitals and clinics
- Joint Commission compliant signage at every AED location
- ADA tactile/Braille signs near patient areas
- Full inspection-tag documentation per readiness program
Stadiums, arenas, and large venues
- Ceiling-hanger and 3D projecting signs visible from 50+ feet
- Multi-language pictogram-only signs for international audiences
- Directional signs every 100 to 200 feet of corridor
What's included with AED sign orders
Every AED sign order from Total AEDs ships with everything you need to install.
Frequently asked questions about AED signs
QAre AED signs required by law?
Requirements vary by state and facility type. California, New York, Illinois, and New Jersey require AED signage in facilities where AEDs are mandated. Even without explicit statutes, ILCOR, ANSI Z535, NFPA 101, the Joint Commission, and the American Heart Association all treat standardized AED signage as a best practice and a duty-to-warn obligation.
QWhere is the best place to put an AED sign?
Mount the primary location sign directly above or adjacent to the AED cabinet with the center 60 to 72 inches above the floor. Add a 3D flag projecting sign perpendicular to the wall (84 to 96 inches above the floor) for corridor visibility, then place arrow signs at hallway intersections, elevators, stairwells, and building entrances.
QDo AEDs need to be labeled?
Yes, in nearly every public-access environment. State PAD laws, OSHA workplace safety expectations, ANSI Z535 facility-signage standards, NFPA 101 Life Safety Code, and Joint Commission accreditation all expect AED locations to be clearly marked with the universal ILCOR/ISO 7010 green AED symbol. An unlabeled AED is a major audit and liability exposure.
QWhat does the standard AED sign look like?
The standard AED sign uses the ILCOR/ISO 7010 E010 symbol: a white heart with a lightning bolt on a green square or rectangle. This green-and-white pictogram is recognized internationally, prevents confusion across languages, and is the only AED symbol referenced by ANSI Z535 and the American Heart Association.
QHow high should an AED sign be mounted?
Mount flat AED location signs with the center 60 to 72 inches above the floor (adult eye level). Mount 3D flag or projecting signs with the bottom of the sign 84 to 96 inches above the floor so the sign sits above head height in busy corridors and is visible from 50 feet or more.
QWhat are the benefits of an AED sign with an arrow?
AED arrow signs guide responders to the nearest AED from anywhere in a building. They are essential at hallway intersections, building entrances, elevators, stairwells, and on multi-story or campus layouts where the AED is not visible from every common area. Without directional signage, even a perfectly mounted location sign is useless to a rescuer two corridors away.
QAre photoluminescent AED signs required?
Not universally, but strongly recommended for any facility where power outages are possible, including schools, hospitals, theaters, parking structures, transit stations, and high-rise buildings. Several state and municipal building codes are trending toward photoluminescent emergency signage as a hard requirement.
QCan I print my own AED signs?
You can print signs for non-regulated environments, but for OSHA, ANSI Z535, Joint Commission, and state-compliant deployments you should use professionally manufactured signs matching the ILCOR/ISO 7010 specification on durable, fade-resistant material. Printable signs fade quickly, lose color accuracy, and may not satisfy duty-to-warn liability standards.
QDo AED signs work outdoors?
Standard indoor AED signs are not built for outdoor exposure. For exterior placements (parking lots, athletic fields, marinas, building exteriors), choose UV-stable, weather-sealed outdoor signs with corrosion-resistant mounting hardware. Indoor signs installed outdoors will fade, peel, and crack within months.
QWhat are AED inspection tags used for?
AED inspection tags document that the AED has been checked for readiness, usually monthly. Inspectors record the date, initials, readiness-indicator status, and next inspection due date. The system is modeled on fire-extinguisher inspection tags and is required by many AED management programs and AHA best practices.
Order AED signs now
Not sure which sign types your facility needs or how many of each? Send us your floor plan or facility size and our AED program specialists will recommend a complete signage package sized for your space.
